Toro AERATOR HC 4000 Operator's Manual page 8

for provisions for two tines.
Turf Guards: Semi-rigid, mounted with compression spring
floatation. Rear mounted roller, provides independent floatation and
allows turf guard to follow turf grass contour. Adjustable roller
scraper removes soil from roller.
Cover: High-density polyethylene material mounted to unit with
flexible draw latches to provide a shield from rotating components.
Safety/Transport Stops: Swing-up safety/transport stops prevent
accidental lowering of coring head during service or during trans-
port operation.
Storage Stand: Provides support for aerator when removed from
tractor and allows quick installation.
Standard Coring Tines: The aerator is assembled with (4) tine
holders for (6) tines and matching turf guards. 24 tines are required
(not included). Order tines from your Authorized Toro Distributor.
Required Optional Equipment: The aerator is shipped without
timing gears due to various tractor tire sizes and ground speed
ratio's. The correct timing gears must be determined and selected
per the instructions in the Operator's Manual. Order gears from
your Authorized Toro Distributor.
Coring Capacity (theoretical) at 2 mph
*(Assumes no reduction in total area due to overlap)
Coring pattern: 6 Tines—1.9cm (
Effective Coring Width : 106 cm.
Total Tine Quantity: 2 rows of 12 = 24
Hole Pattern :8.9 cm " wide x 7.6 cm long
Depth: Up to 10.6 in.
*Sq ft/hr: 11,265 meter
Optional Coring pattern: 2 Tines 2.22 cm (
Effective Coring Width: 106 cm.
Total Tine Quantity: 1 row of 8 tines
Hole Pattern: 13.3 cm wide x 15.24 cm long
Depth: Up to 5 in.
*Sq ft/hr: 2,121 meter
Dimensions:
Length: 121.9 cm
Width: 190.5
Height: 88.9 cm
Weight: 671.8 kg
8
3
⁄ ")
4
2 /hr
7
⁄
8
2 /hr
")