Table of Contents
Advertisement
4. Secure the handle at each lower mounting hole with a
flange bolt (3/8 x 1 inch) and flange nut (Fig. 4).
Note: The handle position can be adjusted to match the
operator 's height preference.
7
8
9
4
2
6
Figure 4
1. Handle assembly
2. Rear frame
3. Flange nut, 3/8 inch
4. Flange bolt, 3/8 x 1 inch
5. Upper mounting hole
Note: Handle assembly must be installed before fuel tank
is installed.
5
1
3
m–6600
6. Lower mounting holes
7. Low position
8. High position
9. Flange bolt, 3/8 x
1–1/4 inch
15
Step
3
Installing the Fuel Tank
Parts needed for this step:
Qty.
1
Fuel tank with studs installed
2
Bolt, 5/16 X 7/8 inch
2
Lock nut, 5/16 inch
4
Washer, 5/16 inch
1
Hose clamp
2
Lock washer, 5/16 inch
2
Spring
Procedure
1. Align the fuel tank with the top of the rear frame
(Fig. 7).
2. Push the fuel line through the grommet and hole in the
hydraulic oil filter bracket (Fig. 5).
4
m–7577
Figure 5
1. Fuel line
2. Grommet and hole
3. Push the fuel line onto the fuel tank connection and
secure it with the hose clamp that is on the fuel line
(Fig. 6).
Note: To ease assembly of the fuel line to fuel tank
connection, apply a light lubricant, such as WD 40, to the
end of the fuel line.
Part
3
1
2
3. Hydraulic oil filter bracket
4. Brake handle
Advertisement
Table of Contents
