Toro Mower Safety - Toro ProLine Hydro Operator's Manual

Remove spark plug wire before making any repairs.
Use care when checking blades. Wrap the blade(s) or
wear gloves, and use caution when servicing them.
Only replace blades. Never straighten or weld them.
Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.

Toro Mower Safety

The following list contains safety information specific to
Toro products and other safety information you must
know.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
This product is designed for cutting and recycling grass or,
when equipped with a grass bagger, for catching cut grass.
Any use for purposes other than these could prove
dangerous to user and bystanders.
General Operation
Be sure the area is clear of other people before
mowing. Stop the machine if anyone enters the area.
Do not touch equipment or attachment parts which
may be hot from operation. Allow to cool before
attempting to maintain, adjust or service.
Use only Toro-approved attachments. Warranty may
be voided if used with unapproved attachments.
Check carefully for overhead clearances (i.e. branches,
doorways, electrical wires) before operating under any
objects and do not contact them.
Slope Operation
All slopes and ramps require extra caution. If you feel
uneasy on a slope, do not mow it.
Remove obstacles such as rocks, tree limbs, etc. from
the mowing area.
Watch for holes, ruts or bumps. Tall grass can hide
obstacles.
Use caution near drop-offs, ditches, or embankments.
The machine could suddenly turn over if a wheel goes
over the edge of a cliff or ditch, or if an edge caves in.
Use extra care with grass catchers or other
attachments. These can change the stability of the
machine.
Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction.
Mow slopes side to side.
Do not mow slopes greater than 15 degrees.
Service
Never store the machine or fuel container inside where
there is an open flame, such as near a water heater or
furnace.
Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good condition.
Never tamper with safety devices. Check safety
systems for proper operation before each use.
Use only genuine replacement parts to ensure that
original standards are maintained.
Check brake operation frequently. Adjust and service
as required.
Hydraulic fluid escaping under pressure can penetrate
the skin and cause injury. Use cardboard or paper to
find hydraulic leaks. Never use your hands.
5