Maintenance; Recommended Maintenance Schedule(S) - Toro ProCore Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
Before each use or daily
Every 4 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 600 hours
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
Maintenance Procedure
• Check the torque of the wheel nuts
• Change the engine oil
• Check condition and tension of belts
• Check the engine oil level.
• Clean the engine screen and the oil cooler.
• Check the hydraulic lines and hoses.
• Check chopper tips
• Check brush wear
• Clean brush/chopper housing
• Inspect and clean the brush/chopper housings Clean the brush/chopper housing
more often in high soil moisture conditions.
• Grease the bearings and bushings
• Check condition and tension of belts
• Change the engine oil.
• Check the battery electrolyte level
• Clean the engine
• Check and/or replace the primary air filter.
• Replace the oil filter.
• Check the spark plugs.
• Replace the safety air filter.
• Replace the fuel filter
32