VocoPro DVD-Duet Digital Key Control DVD/CD/CDC Dual Cassette Karaoke System Owner's Manual page 17

Getting Connected to External Components
Connecting to a HDTV or video monitor
To connect video to a HDTV you can use the same connections as for TV with Component Video. See Video
preferences under System Setup menu for selecting video output type.
Connecting to a DTS Receiver/Decoder
Using either an RCA type COAXIAL cable for digital audio or an OPTICAL cable, connect one end to the re-
specitve Coaxial or Optical jack of the DUET and the other end to the appropriate jack on the DTS receiver. If
you have both coaxial and optical inputs on your DTS decoder/receiver, it is recommended to use an optical
connection as those cables eliminate the possibility of Electromagnetic Interference.
Connecting to a Dolby Digital AC-3 Receiver/Decoder
Using either an RCA type COAXIAL cable for digital audio or an OPTICAL cable, connect one end to the re-
specitve Coaxial or Optical jack of the DUET and the other end to the appropriate jack on the DTS receiver. If
you have both coaxial and optical inputs on your DTS decoder/receiver, it is recommended to use an optical
connection as those cables eliminate the possibility of Electromagnetic Interference.
Connecting both Analog and Digital Audio
To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs. Use optical for
video and digital audio and L/R RCA audio for Karaoke features.
AUDIO COMPONENT VIDEO OUT
OUT Y Cb Cr
L
R
MUSIC
COAXIAL VIDEO S-VIDEO OPTICAL
ONLY
MUSIC + MIC
L R
AUDIO OUTPUT
-or-
AUDIO COMPONENT VIDEO OUT
OUT Y Cb Cr
L
R
MUSIC COAXIAL VIDEO S-VIDEO OPTICAL
ONLY
MUSIC + MIC
L R
AUDIO OUTPUT
-or-
AUDIO COMPONENT VIDEO OUT
OUT Y Cb Cr
L
R
MUSIC
COAXIAL VIDEO S-VIDEO OPTICAL
ONLY
MUSIC + MIC
L R
AUDIO OUTPUT
and
17
AUDIO COMPONENT VIDEO OUT
OUT Y Cb Cr
L
R
MUSIC
COAXIAL VIDEO S-VIDEO OPTICAL
ONLY
MUSIC + MIC
L R
AUDIO OUTPUT
DTS
Receiver/Decoder
Dolby Digital AC-3
Receiver/Decoder
Dolby DTS/
AC-3 Receiver