Download Print this page

Dvd Basics; Playing Audio Cds - Vizualogic A-2000 Owner's Manual

Headrest video monitor system with built-in dvd
Hide thumbs

Advertisement

OSD Function Control
OSD MAIN MENU – Press MENU key to enter OSD main menu, then select
Item in the menu by continuously hitting MENU key. Use the up and down
buttons to change the value.
CONTRAST – Adjust CONTRAST value from 0 -32 (default:16)
BRIGHTNESS – Adjust BRIGHTNESS value from 0-32 (default:16)
COLOR – Adjust COLOR value from 0-32 (default:16)
TINT – Adjust TINT value from 0-32 (default:16)
SHARPNESS – Adjust SHARPNESS value from 0-32 (default:16)
WIDE SCREEN – Changes the image size displayed onscreen from wide,
normal, or zoom.
RESET DEFAULT – Resets all OSD adjustment values to default (except
screenmode).

DVD Basics

To get the maximum use out of your DVD player, make sure to review this
section completely.
REGIONAL CODING
Both the DVD player and disc are coded by region. These regional codes must
match in order for the disc to play. The integrated DVD player has region 1
coding. DVD's with other regional codes cannot be played in this unit.
TYPES OF DISCS THE INTEGRATED DVD PLAYER WILL PLAY:
• DVD-Video: DVD contains video.
• CD-DA: CD contains musical or audio content only.
• CD-Video: CD contains movie only.
• CD-R/RW: A disc that contains audio files (for example, a CD-R with
downloaded MP3 Files), MPEG, or JPEG files.
10
TYPES OF DISCS THE INTEGRATED DVD PLAYER WILL NOT PLAY:
• Optical disc
• ECD-1, CD-ROM, DVD-ROM
• Mini disc
• ECDG (audio only, not graphics).
LOADING AND PLAYING A DISC
Press the POWER button on either the front of the Headrest Mounted DVD
player or the remote to turn the DVD player on. Insert the disc into the loading
slot (with the label side facing towards the rear of the vehicle) until the DVD
player fully loads the disc. The disc should begin to play automatically. The disc
can be played, stopped or ejected by utilizing either the DVD player's front panel
or remote.

Playing Audio CDs

When playing an audio CD, the DISPLAY banner appears automatically. It
displays the current track and the amount of the time for that track playing, the
total amount of time on the disc and the current time running on the disc. Press
the DISPLAY button on the remote to display the DISPLAY banner. The options
below show you what happens when you press the DISPLAY button.
Press DISPLAY (1x) – "Single Elapsed" appears along with the current track
number playing and the time of that track .
Press DISPLAY (2x) – "Total Remain" appears along with the current track
number playing and the amount of time remaining on
the entire CD.
Press DISPLAY (3x) – "Single Remain" appears along with the current track
number playing and the amount of time remaining.
Press DISPLAY (4x) – "Total Elapsed" appears along with the current track
number playing and the total time playing on CD.
11

Advertisement

loading

  Also See for Vizualogic A-2000

  Related Manuals for Vizualogic A-2000