Use Of Instruments (Picture 1); Ignition - Texas A/S Cruise 250 2005 User Manual

Use of instruments (Picture 1)

1. Speedometer (8)
The speedometer shows the speed in km.
The odometer shows the distance driven in km. Use the measured distance to check when it is
time for the next service inspection, oil change etc.
2. Revolution counter (12)
The revolution counter shows the revolutions of the engine. The revolutions may never enter the
red field as you may then damage the engine.
3. Petrol gauge (21)
F means full and E means empty. Always check the level with the cruiser standing on the centre
stand.
Note. The fuel gauge will always point at E, until the ignition is activated.
4. Turn signal (3)
Press the switch to the left or right and the turn signal will be activated in the direction you want
to go. Press the button in and the turn signal is switched off.
5. Passing (5)
Is turned on by activating the switch on the left handle.

Ignition

The ignition turns on power for the electric parts. Always take the key with you, when you leave
the cruiser.
1. (symbol A) – You may start the cruiser.
2. (symbol B) – The engine is turned off and you cannot start the engine.
b.
c.
d.
6
a.