Sony DMW-S05NL-C Installation Manual page 48

3-5 Fibre Channel Storage Unit Setup — Configuring Logical Drives
Creating Logical Drives
Proceed as follows.
1
Start the Disk Management tool by doing the
following.
Select Start > Settings > Control Panel >
Management Tools > Computer Management, to
open the Computer Management window, and
click on the Disk Management folder.
2
In the Computer Management window, check to be
sure that all of the disks in the DMW-ST001 are
set to Dynamic/Online.
Note
If a disk is not set to Dynamic/Online, refer to the
explanations in the following sections and change
it to Dynamic/Online.
• "To change a missing disk to a Dynamic/Online
disk" (page 3-18)
• "To change a Dynamic/Foreign disk to a
Dynamic/Online disk" (page 3-19)
3-16
Chapter 3 Preparations
3
Create a volume as follows.
Right click on the first disk (in this example, Disk
2) in the volume and select Create Volume...
The Create Volume Wizard starts.
4
Click Next.
The next screen appears.