5. MOUNTING HARDWARE INSTALLATION
Before mounting the speaker, check the ceiling structure is of drop ceiling with 2-foot standard ceiling tiles.
[Installation view on Drop Ceilings]
Caution
Set the tile bridge so that both ends fit securely into the T-grids, even if the ceiling tile accidentally falls off.
T-grid
[Installation procedures]
Step 1. Cut a ø250 mm (9
Use the supplied paper pattern to position and trace the hole.
Step 2. Place the supplied tile bridge on the 2-foot tile as shown below.
6
Ceiling tile
27
/
") hole in the ceiling.
32
ø250 ±5 mm (9
2-foot tile
T-grid
/
±
/
")
27
13
32
64
Ceiling tile
Tile bridge (accessory)
Tile bridge (accessory)