Usb Fdd Kit - Toshiba TECRA A10/S10/M10/SATELLITEPRO S300 TECRA S10 User Manual

USB FDD Kit

The USB floppy diskette drive accommodates either a 1.44MB or 720KB
floppy diskette and connects to one of the computer's USB ports.
Connecting the USB floppy diskette drive
To connect the drive, plug the floppy diskette drive's USB connector into a
computer's USB port.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
If you connect the USB floppy diskette drive after the computer has already
been turned on, it will take about ten seconds for it to be recognized by the
computer. Do not attempt to disconnect and reconnect the drive before this
period has elapsed.
User's Manual
USB connector
Disk-In-Use Indicator
Floppy diskette slot
Eject button
Figure 3-13 The USB floppy diskette drive
Figure 3-14 Connecting the USB floppy diskette drive
TECRA A10/S10/M10/SatellitePro S300
USB port
USB connector
3-29