Back - Toshiba TECRA A10/S10/M10/SATELLITEPRO S300 TECRA S10 User Manual

TECRA A10/S10/M10/SatellitePro S300

Back

The following figure shows the computer's back.
LAN active indicator (orange)
LAN jack
LAN jack
Do not connect any cable other than a LAN cable to the LAN jack.
It could cause damage or malfunction.
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
Link indicator
(green)
LAN active
indicator (orange)
External monitor
port
DC IN 15V jack
2-6
Link indicator (green)
External monitor port
Figure 2-4 The back of the computer
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Refer to Chapter 4,
Operating Basics, for details.
This indicator glows green when the computer is
connected to a LAN and the LAN is functioning
properly.
This indicator glows orange when data is being
exchanged between the computer and the LAN.
This port provides 15-pin, analog VGA port.
This port allows you to connect an external
monitor to the computer.
The AC adaptor connects to this jack in order to
power the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the
computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.
DC IN 15V jack
User's Manual