Toshiba TECRA A10/S10/M10/SATELLITEPRO S300 TECRA S10 User Manual page 158

TECRA A10/S10/M10/SatellitePro S300
General
This window displays the BIOS version and contains two buttons: Default
and About.
Default
About
Setup
This field displays the installed BIOS version and date.
Display
This tab lets you customize your computer's display settings for either the
internal display or an external monitor.
Power On Display
This tab allows you to select the display to be used when the computer is
started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
The Power On Display is supported with some models.
Auto-Selected
LCD + Analog RGB
If the connected external monitor does not support the computer's current
video mode, selecting the LCD + Analog RGB mode will not display any
image on the external monitor.
7-2
Return all HW Setup values to the factory
settings.
Display the HW Setup version.
Selects an external monitor if one is connected,
otherwise, it selects the internal display (default).
Selects both the internal display and an external
monitor for simultaneous display.
User's Manual