Connect; Connect To Hdmi Arc Socket; Connect To Optical Socket; Connect To Aux Socket - Philips 6000 Series User Manual

3 Connect

This section helps you connect your Soundbar
to a TV and other devices, and then set it up.
For information about the basic connections of
your Soundbar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate at
the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect to HDMI ARC
Socket
Your Soundbar supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your Soundbar by using a single HDMI cable.
1
Using a HDMI cable, connect the
HDMI ARC connector on your Soundbar
to the HDMI ARC connector on the TV.
The HDMI ARC connector on the TV
•
might be labeled differently. For details,
see the TV user manual.
2
On your TV, turn on HDMI-CEC operations.
For details, see the TV user manual.
Note
•
Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
•
The setting method of HDMI-CEC and ARC may differ
depending on the TV. For details about ARC function,
please refer to your TV owner' s manual.
•
Only HDMI 1.4 compatible cables can support the ARC
function.
Connect to Optical
Socket
1
Using an optical cable, connect the
OPTICAL connector on your Soundbar
to the OPTICAL OUT connector on
the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.

Connect to AUX Socket

• Use a 3.5mm to 3.5mm audio cable to
connect the TV' s headphone socket to the
AUX socket on the unit.
9