Table of Contents
Advertisement
Adjust the Volume
When adjusting the volume of the soundbar
and subwoofer, the status indicator will increase
/ decrease the amount of light. According to
the corresponding light display / blinking (Fig),
determine the current volume level of the
soundbar and subwoofer.
Adjust the S
oundbar's
1
+/- (Volume) to increase or
Press
decrease the soundbar' s volume level.
•
To mute sound, press
•
To restore the sound, press
again or press Vol+/Vol- (Volume).
Adjust the Subwoofer's Volume
1
+/- (subwoofer) to increase or
Press
decrease the subwoofer' s volume level.
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your Soundbar speakers.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 4.2 + EDR.
•
The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
Volume
(Mute).
(Mute)
1
Press the
button repeatedly on the
unit or press BT/Pair button on the
remote control to switch the Soundbar to
Bluetooth mode.
The BT indicator will blink.
2
On the Bluetooth device, switch on
Bluetooth, search for and select
Philips TAB6305 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
During connection, the BT indicator
will blink.
3
Wait until you hear voice prompt from the
Soundbar.
If the successfully connected, the BT
indicator will light up solidly.
4
Select and play audio files or music on your
Bluetooth device.
•
During play, if a call is coming, music play
is paused. Play resumes when the call
ends.
•
If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
track, or press
play.
5
To exit Bluetooth, you can:
•
Switch the unit to another source.
•
Disable the function from your
Bluetooth device. Or place your
Bluetooth device out of the maximum
operational range. The Bluetooth device
will be disconnected from the unit after
the voice prompt.
•
Press and hold the BT/Pair button on
the remote control or the
on the unit.
/
to skip to a
to pause/resume
button
13
Hide quick links:
Advertisement
Table of Contents
