D-Link Air DWL-122 Manual page 14

Using the Configuration Utility with Windows OS
(continued)
Status:
Displays the MAC Address
of the Access Point or
Router to which the DWL-
122 is associated
SSID:
The Service Set Identifier is
the name assigned to the
wireless network. The
factory SSID setting is
default.
Frequency:
802.11b indicates that the
DWL-122 is communicat-
ing in the 2.4GHz band.
Wireless Mode:
Either Infrastructure or Ad-Hoc will be displayed here. (Please see the
Getting Started section in this manual for an explanation of these two modes.)
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Tx Rate:
The default setting is Auto; Tx Rate settings are automatically determined for
an optimal speed up to a maximum of 11Mbps.
Channel:
The default setting is Auto. The channel selection is automatically determined
by the DWL-122.
Signal Strength:
Displays the signal strength of the DWL-122's wireless connection to the
Access Point or Router.
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal with the current SSID and associates with
that Access Point or Router
Link Info
14