Optical Output Of Audio Received - Vizio VO37L FHDTV10A User Manual

VIZIO VO37L FHDTV10A User Manual

Optical Output of Audio received

If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VO37L FHDTV10A.
1. Turn off the power to the LCD HDTV and
Receiver/Amp.
2. Using an SPDIF cable, connect the cable to the
audio input connector on the Receiver/Amp and
connect the other end to the OPTICAL OUT (white
area) audio connectors at the rear of the LCD
HDTV.
3. Turn on the power to the LCD HDTV and
Receiver/Amp.
4. Then press the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the
to select the Audio Adjust menu.
6. Press the
to select SPEAKERS.
7. Press the
to select OFF so that the sound from
the LCD HDTV will now be routed
through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
button on the
on the remote control
on the remote control
on the remote control
www.VIZIO.com
28