Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VO37L FHDTV10A User Manual

Chapter 1 Basic Controls and Connections

Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to
the sensor. Point the remote control directly at this
window for the best response to the remote signal.

Side Panel Controls

POWER ( ) – Switch the VO37L FHDTV10A on by
pressing the button once.
VO37L FHDTV10A off.
MENU – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will proceed to the
next menu level.
CH + / - – Use these buttons to step up or down the TV
channels. While the OSD is
active, these buttons
function as up and down
controls in the OSD menus.
VOL + / - – Use these
buttons to increase
decrease to the speaker
volume. While the OSD is
active, these buttons
function as left and right
controls in the OSD menus.
INPUT –
Repeated pressing of this
buttons steps through the
input sources in the following sequence: TV, AV1/S-Video, AV2, Component1, Component2, RGB, HDMI
1, HDMI 2 and HDMI 3. Once you have stepped through the entire sequence, you will return to the
beginning. If a sub-menu is active, pressing this button will return to the previous menu level.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 10/17/2008
Press the button again to the
or
www.VIZIO.com
VIZIO VO37L FHDTV10A User Manual
11