auna Ambient 10034900 Manual page 37

The following appears on the display Scan setting.
• Press the dial to confirm the selection.
• Press the TUNE+ or TUNE- button or turn the dial to select 'Strong
stations' only or All stations.
• Press the dial to confirm the selection.
Saving your favourite stations
• To store the current radio station manually, press the PRESET button
for approx. 2 seconds. The LCD display shows the preset with the last
selected radio station (if radio stations have already been stored). If
no radio stations have yet been stored, the LCD display shows Store
preset 1: (Empty).
• Briefly press the TUNE+ or TUNE- button (several times if necessary) or
turn the dial to select the desired preset.
• Press the dial to store the station in the selected preset.
The LCD display shows Preset (1-40) stored.
NOTE
Stored radio stations are overwritten if you store other stations in station
presets that are already occupied.
Calling up saved stations
In FM radio mode, briefly press the PRESET button to call up the FM radio
stations stored in the presets. The LCD display shows the message Preset
Recall.
Press the TUNE+ or TUNE- button several times or turn the dial to select the
one of the presets with a stored radio station.
Briefly press the dial to play the selected radio station.
Station information
In FM radio mode, you can show additional station information on the LCD
display. Briefly press the INFO/MENU button repeatedly to display the
following station information:
• Scrolling text (radio text) – Programme type
• Stereo/mono reception
• Time
• Date
Notes: The amount of station information available may vary depending
on the selected station.The stereo/mono reception setting is automatic
depending on the selected station and its reception quality and cannot be
changed manually.
EN
37