Graco WB3000 Instructions - Parts Manual page 32

Maintenance
7. Follow the Pressure Relief Procedure, page
Engage the trigger lock.
8. Align the spray tip tab with the groove in the air
cap. Install the tip.
9. Reinstall the air cap, tip guard, and retaining ring.
32
26. 10. Open the isolated enclosure door. Leave the
flushing fluid in the system until you are ready
to spray again.
11. Hang the gun from its hook, with the nozzle
pointing down. Be sure to keep the gun from
grounding out.
12. Before using the system electrostatically again,
make sure no flammable vapors are present.
3A2497C