Page 1
Rack mounting screw set Optional Extras 1 or 2 x slide rail kits to suit the ALIX 2-2 or ALIX 2-3 boards 4 x wide and 2 x narrow aluminium strips, 1 locator strip, 4 x nylon spacers, ➢...
Page 2
Tools Materials Anti-static wrist strap If you don't have them already, you'll need: 2mm hex key (supplied) 1 or 2 x ALIX 2-2 or ALIX 2-3 boards Phillips head screwdriver Compact Flash Card (1 per board) ...
Page 3
Step 3 Configure and install a Compact Flash card To use your rack mount ALIX 2, you will need to have a CF card with a suitable operating system installed in the CF socket on the board. If your CF card does not already have an operating system installed, you can either mount the CF card in another machine (e.g.
Page 4
Slide the board back into the case Before you can begin using your ALIX 2, you will need to slide the board back into the case. 1. Ensuring that the edges of the ALIX board are properly engaged in the slide rails, slide the board back into the case.