Hot Swap; External Bootup - Onnto USB 2.0 2-Bay RAID System User Manual

HOT SWAP

Hot Swap here refers to HDD Hot Swap (Hard Disk Hot Swap), not True Hot
Swap.
The USB 2.0/FireWire 800 model does not support HDD Hot Swap in JBOD or
Mirror. It is also not recommended to perform Hot Swapping in Span or Stripe
modes. Ensure that the RAID System is powered "off" before replacing the
HDDs.
HDD Hot Swap (Hard Disk Hot Swap) refers to the ability to add or remove
a device from the host computer without powering off the device; the system
automatically recognizes the change after the hot swapping is done. True Hot
Swap refers to the ability to add or remove a device from the host computer
when the data is still accessing.

EXTERNAL BOOTUP

PC
The External Bootup with different interface:
OS \ Interfaces
Windows
DOS
Linux
MAC
The External Bootup varies by different platforms and interface:
Platform \ Interfaces
Power Mac G3 or older
models
Power PC CPU
Intel-based CPU
Please review the Troubleshooting section on our website for more
information.
USB 2.0
No
Yes
No
USB 2.0 FireWire 800
No
No
Yes
47
IEEE 1394b
No
No
No
No
Yes
Yes