Setting The Raid Mode - Onnto USB 2.0 2-Bay RAID System User Manual

SETTING THE RAID MODE

Deleting the current partition prior to changing RAID modes is highly
recommended.
For the USB 2.0/FireWire 800 model, alternatively, after deleting the current
partition and turning "off" the power switch, set the new RAID mode and power
the RAID system "on" again. The RAID system can then be used with the
updated RAID mode.
Pressing the reset button is not required.
1. Power "off" the RAID System.
2. Use a small, flat-blade screwdriver to select the RAID Mode.
1
41
2