Hot Swap; External Bootup - Onnto USB 2.0 2-Bay RAID System User Manual

HOT SWAP

Hot Swap here refers to HDD Hard Disk (Hard Disk Hot Swap), not True Hot
Swap.
The eSATA/USB 2.0 model supports HDD Hot Swap in JBOD or Mirror.
However, since it refers to Hard Disk Hot Swap, it is not recommended to
perform Hot Swapping when the HDD is transferring data. When one HDD is Hot
Swapped, the system will reset while interrupting data transfer and causing data
loss.
HDD Hot Swap (Hard Disk Hot Swap) refers to the ability to add or remove
a device from the host computer without powering off the device; the system
automatically recognizes the change after the hot swapping is done. True Hot
Swap refers to the ability to add or remove a device from the host computer
when the data is still accessing.

EXTERNAL BOOTUP

PC
The External Bootup with different interface:
OS \ Interfaces
Windows
DOS
Linux
MAC
The External Bootup varies with different platform and interfaces:
Platform \ Interfaces
Power Mac G3 or older
models
Power PC CPU
Intel-based CPU
If the computer does not come with eSATA interface and an optional eSATA
card is added, choosing the card that comes with the built-in driver in the
operation system is highly recommended. Please refer to the Troubleshooting
section on our website for more information.
USB 2.0
No
Yes
No
USB 2.0
Mac driver built-in
No
No
Yes
31
eSATA
Yes
Yes
Yes
eSATA
No driver built-in
No
Yes
Yes
No
No
No