Safe Removal Of The Raid System; Led Indicators; System Led X 1; Hdd Led X 2 - Onnto USB 2.0 2-Bay RAID System User Manual

SAFE REMOVAL OF THE RAID SYSTEM

Safe removal of the RAID System from the host controller requires the steps.
First, you would need to eject the device from your host controller. Next, press
the "off" button on the RAID System if necessary.
Most current USB host controllers handle USB devices as external devices;
thus, it is highly recommended that the RAID System be safely removed from the
host if you use USB interface. However if you use eSATA interface, the host,
depending on the eSATA controller, may handle external eSATA HDD devices
as internal HDD devices, if so, safe removal of the RAID System from the host is
unnecessary.

LED INDICATORS

SYSTEM LED x 1

Indicators
Power on
Power off

HDD LED x 2

Indicators
Disk error
Disk error
Data access
Source HDD
Disk rebuild
Target HDD
The difference between a flashing LED and a blinking LED is that flashing
refers to the read/write activity, and blinking refers to slow but regular pulses.
SYSTEM
HDD 1
Color 1
Color 2
Color
Orange
None
RAID Mode
Stripe, Span, Mirror
JBOD
Stripe, Span, Mirror, JBOD
Mirror
Mirror
29
HDD 2
Color 1
Color 2
Color 1
Blink Green
None
Green
Green
Blink Green
Color 2
Blink Blue
None
Flash Blue
Blue
Blue