Setting The Raid Mode - Onnto USB 2.0 2-Bay RAID System User Manual

SETTING THE RAID MODE

Deleting the current partition prior to changing RAID modes is highly
recommended.
For the USB 2.0 model, after deleting the current partition and turning "off" the
power switch, set the new RAID mode and power the RAID system "on" again.
The RAID system can then be used with the updated RAID mode.
Pressing the reset button is not required.
1. Power "off" the RAID System.
2. Use a small, flat-blade screwdriver to select the RAID Mode.
1
13
2