9
10
11
Attach the ferrite core (A) as close to
the square B-type connector (i.e., the
machine side) of the USB cable (B) as
possible.
The ferrite core is installed in order to
reduce noise emitted from the cable.
12
Connect the machine and your
computer with a USB cable (C).
Connect the machine to the network
correctly, and confirm that the power
is on.
If you are using Windows XP, [Found New
Hardware Wizard] dialog box appears.
Select [Install Software Automaticall
(Recommended)] then click [Next].
13
Proceed to the step indicated below
that corresponds to the drivers you
selected in step 3.
Only the UFR II Printer Driver: proceed
●
to step 35
UFR II Printer Driver and PCL Printer
●
Driver: proceed to step 4
UFR II Printer Driver, PCL Printer Driver,
●
and Fax Driver: proceed to step 4
UFR II Printer Driver and Fax Driver:
●
proceed to step 4
14
15
16
4