•
Do not connect the USB cable before installing the software. If you connect the USB cable before
installing the software and the Found New Hardware Wizard screen appears, click [Cancel].
•
For Windows 2000/XP/Server 2003/Vista, log on as Administrator to install the software.
•
Make sure the machine is turned on before connecting the USB cable.
•
On the screen shown at each step, click on the circled button to proceed.
•
The machine does not come with a USB cable.
•
For information on uninstallation, see Reference Guide > Troubleshooting > Uninstalling Software.
System Requirements
Microsoft Windows 98/98SE
CPU: Intel 80486DX/66 MHz or faster
Memory: 4 MB or more
Microsoft Windows Me
CPU: Intel Pentium/50 MHz or faster
Memory: 3 MB or more
Microsoft Windows 2000 Professional/Server
CPU: Intel Pentium/33 MHz or faster
Memory: 64 MB or more (Server: 8MB or more)
Before Installation:
Microsoft Windows XP Professional/Home Edition
CPU: Intel Pentium/33 MHz or faster
Memory: 64 MB or more
Microsoft Windows Server 2003
CPU: Intel Pentium/33 MHz or faster
Memory: 8 MB or more
Microsoft Windows Vista
CPU: Intel Pentium/800 MHz or faster
Memory: 5 MB or more