Description Of The Unit; Mode Of Operation; Device Diagram - Kaco blueplanet 50.0TL3-R Operating Instruction

3

Description of the unit

3.1

Mode of operation

The device has been developed specifically for the provision of reactive power.
To implement reactive power control at the grid connection point, the control system reads the measured reactive power
at the grid connection point.
If the actual value is different to a specified value, additional reactive power can be ordered from this device, in this way
the reactive power at the grid connection point can be compensated or the device operates according to static specifica-
tions.
3.2

Device diagram

1
7
6
Fig. 3: Device diagram
1 Housing
2 Housing door
3 Status indicator with display and operator panel
4 Mount with fan
3.2.1 Interfaces
You can configure the interfaces and the web server in the Settings menu. The device has the following interfaces for
communication and remote monitoring.
Ethernet interface
The Ethernet interface can be used by a connected control system for reactive power specification on RPO devices.
The local web server can be used to configure the device and perform updates.
RS485 interface
The RS485 interface can be used by a connected control system for reactive power specification on RPO devices.
KACO blueplanet 50.0TL3-R
2
3
4
5
5 Interfaces / cable feed-through
6 Communication - USB port / cable feed-through
7 AC connection / cable feed-through
Page 9