Connecting To The Ac Power Source - Sony S-Frame DPF-D70 Operating Instructions Manual

• Using a battery other than the specified one may
result in the battery rupturing.
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
• Take care that no foreign objects enter inside the
remote control when you. for example. replace the
battery.
• Incorrect use of the battery may cause leaking and
corrosion.
- Do not recharge the battery.
- When the remote control wi 1\ not be used for a
long period of time. remove the battery from the
remote control to prevent leaking and corrosion.
- Incorrectly inserting. shorting. dismantling. or
heating the battery. or throwing it into a fire
may cause the battery to rupture and leak.
About descriptions in this
manual
The operations described in this manual are
based on remote control operation. When an
operation is performed differently with the
remote control and buttons on photo frame. it
will be explained in a tip.
Connecting to the AC
power source
1
Insert the plug of the AC adaptor
into the DC IN 12 V jack on the rear
of the photo frame.
2
Connect the AC adaptor to the wall
outlet.
I
To wall outlet
AC adaptor
• A socket outlet should be as close as possible to ullit
and easily accessible.
• Do not place the photo frame in an unsteady
location such as on an uneven table or tilted surface.
• Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor. immediately shut off the power by
disconnecting the plug from the wall outlet.
• Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
• Do not use the AC Adaptor placed in a narrow
space. such as between a wall and furniture.
Continued
11
GB