Example: Activate WAN Backup
1.
Login to DX system.
2.
Follow the path: Network -> Connection
3.
Set Primary Connection as "WAN"
4.
Set Secondary Connection as "Celluar1"
5.
Set Tertiary Connection as "Celluar2"
6.
Set Ping or FTP/ SFTP for Auto Detect. Input the target IP addresses.
Operation
Instruction
Notice
Make sure the target IP address allows to be pinged.
Does not support Domain Name input.
7.
Set WAN Backup as "Enable"
8.
Set WAN Check Interval as 10 seconds (Default setting is 10s)
9.
Click "Save"
Illustration
Cha p ter 3 F unc tio ns
3 - 9
_3