Linking Modules - JAMO AVD4.6 Installation Manual

8
AM4.6
Cat5e
Cat5e
AM4.6
12 pcs.
C4.6 couplers
Cat5e
AM4.6

Linking modules

12 pcs.
C4.6 couplers
AM4.6
Fig. 6
VM4.6
6 pcs.
C4.6 couplers
Cat5e
Fig. 7
AM4.6 Linking
In an installation with more then 4
main zones and 4 sub-zones the link-
ing facility of the AM4.6 is used.
The AM4.6's are linked with a CAT5e
cable to the Hub Link in and out sock-
ets on each AM4.6.
The audio signals from the source
equipment can be shared by joining
the AM4.6's using 12 pcs. Jamo C4.6
couplers. The couplers connect the
loop outs of the first AM4.6 to the au-
dio inputs of the second AM4.6. This
makes is possible to access the same
sources and distribute them to all
main and sub-zones.
A maximum of four AM4.6 can be
linked together to generate a total of
16 main zones and 16 sub-zones.
VM4.6 Linking
The VM4.6 can be linked the same
way as the AM4.6 if more then 4 main
zones and 4 sub-zones are required.
To be able to provide power and
switching commands each VM4.6
must be connected to a correspond-
ing AM4.6 with a CAT5e cable.
VM4.6
The video signals can be shared and
controlled the same way the audio
signals are shared and controlled on
the AM4.6s. Connect the loop out
sockets on the first VM4.6 to the
video inputs on the second VM4.6
using 6 pcs. Jamo C4.6 couplers.
As with the AM4.6 a maximum of four
VM4.6 can be linked together for a 16
main zone and 16 sub-zone system.