Safety Information - JAMO AVD4.6 Installation Manual

2
Important safety information
Before installing cables or the Jamo AVD4.6 system it is important that you check and comply with all building regulations or
codes applicable to your area. If you are in any doubt contact your local building regulations/code office and/or seek profes-
sional advice.
Read instructions - All the safety and operating instructions should be read before the AVD4.6 system is operated.
Keep instructions - The safety and operation instructions should be kept for future reference.
Heed warnings - All warnings on the product and the operating instructions should be adhered to.
Follow instructions - All operating and use instructions should be followed.
Cleaning - Unplug all system components from the wall outlet before cleaning any part of the system. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Attachments - Do not use attachments which are not recommended by the manufacturer as they may cause hazards.
Water and moisture - Do not install the AVD4.6 modules and power supply near water, for example, near a bath tub or sink; in
a wet basement, or near a swimming pool etc.
Accessories - Do not install any part of the system on an unstable surface, stand, bracket or table. The product may fall, caus-
ing serious injury to a child or adult, and may damage the product. Any mounting of the product should follow the manufac-
turer's instructions, and should use a mounting accessory if recommended by the manufacturer.
Ventilation - Slots and openings in cabinets/enclosures are provided for ventilation and to ensure reliable operation of the
product and to protect them from overheating. These openings must not be blocked or covered. The openings should never
be blocked by placing the product on a soft surface. The AM4.6 should not be placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided and the manufacturer's instructions have been adhered to. For all compo-
nents, the manufacturers instructions on ventilation must be adhered to.
Power Sources - The PS24 should be operated only from the type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your product dealer or local power company.
Grounding or Polarization - In some countries the PS24 may be equipped with a polarized mains plug (a plug having one pin
wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
Power-Cord Protection - Power cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, mains sockets/outlets, and the point where they exit
from the product.
Protective Attachment Plug - In some countries product may be equipped with a plug having overload protection (fuse). This
is a safety feature. If replacement of the plug is required, be sure the service technician has used a replacement plug specified
by the manufacturer that has the same overload protection as the original plug.
Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning or power-line surges.
Overloading - Do not overload wall outlets, extension cords, or integral mains sockets/outlets as this can result in a risk of fire
or electric shock.
Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to an authorized service agent.
Damage Requiring Service - Refer any part of this system requiring service to an authorized Jamo service agent only.
Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.