Page 2
VIII. Maintenance Guide To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails. 1.Bee's wax is recommended or Paraffin wax from a standard candle can be used. 2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact when opening and closing the drawer.
Page 3
Part# Description Part# Description Top panel Left drawer side Right side panel Right drawer side Left side panel Drawer bottom Bottom panel Drawer back Right crossbeam foot Small drawer front Large left drawer side Left crossbeam foot Bottom panel Large right drawer side Foot Large drawer back Drawer runner...
Page 5
Step 1 Please assemble on a clean soft surface to avoid damage. Insert wood dowel (A) and glue (I) into parts (2, 3, 5, 6, 11, 12, 16, 17, 19). Ø8*30mm Insert wood dowel (B) and glue (I) Ø8*20mm into part (9). Step 2 Use screw (C) to attach parts (9) to parts (2,3)
Page 6
Step 3 Secure front cross beam (20) to panels (2,3) using screw (D) Ø3,5*30mm Step 4 Attach bottom panel(4) to body using screw (E) Ø4,0*40mm Step 5 Use screw (D) to attach part (5) to part (8) and attach part (6) to part (8), do this step twice Ø3,5*30mm...
Page 7
Step 6 Ø4,0*40mm Use screw (E) to attach legs to body. Use screw (G) and hex key (H) to attach Ø7*80mm the feet to the body, from inside the unit. Attach crossbeam (19) to body using screw (E) Step 7 Use screw (D) to attach part (1) to body Ø3,5*30mm...
Page 8
Step 8 Ø10*10 Secure back panel (7) with part (J) to body with nails (F) 714mm Step 9 Insert wood dowel (B) into the front hole in the drawer rail (9). FRONT Ø8*20mm...
Page 9
Step 11 Attach parts (11,12) to part (15) , insert panel (13) into groves and secure part (14) with screws(D). Ø3,5*30mm Step 12 Attach parts (16,17) to part (10) , insert panel (13) into groves and secure part (18) with screws(D). Ø3,5*30mm Step 13 Insert wood dowel (B) on the...
Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. 1º 2º Wall Back panel Ø6mm Ø3,5*30mm P.10...