Programming The Universal Remote Control; To Program The Remote To Control Other Devices; Device Program Codes - Vivitek DVR5612 User Manual

56" micro chip display projection tv projector user guide

Hide thumbs

Table Of Contents

Table of Contents

The TV device button has been preset to work with your RPTV TV (program code 0080). You can program the remote

control to work with as many as seven other devices.

To program the remote to control other devices:

Turn on the device.

2 Press the matching device button on the remote control.

SETUP

Press and hold the

4 Enter the programming code for the device and manufacturer. For a list of device programming codes, see"Device

program codes" below. If the code is accepted, the LED flashes twice after the last digit is entered.

If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the device and manufacturer.

Important

If there more than one code listed for the device and manufacturer, make sure that you try all the codes listed to find

the one that works for the device.

5 Point the remote control at the device and press the

Tips & Tricks

If you cannot find your manufacturer in the device list or the program code does not work, you can use the remote

control to search for the correct component code. See "Searching for device codes" on page 36.

Device program codes

Use the codes in the following tables to program the remote control to work with your existing audio and video devices.

Amplifier and tuner codes

Manufacturer

Bose

Harman/Kardon

JVC

Marantz

Optimus

Philips

Cable set-top box codes

Manufacturer

ABC

Americast

Bell South

General Instrument

Goldstar

Hamlin

Jerrold

Memorex

Motorola

Pace

Panasonic

Paragon