Introduction The Control Panel And Remote Control - Vivitek DVR5612 User Manual

6

Introduction the Control Panel and Remote Control


.IR Sensor
This is a windorw which receivers infrared signal from the remote
controller
2.VOL
When OSD disappear. Thess buttoms is used for adjust volume
◄Volume decreases ►Volume increases
When OSD display. These are used for OSD menu ◄► item select
3.CH
If the source of image is TV. These buttons are for selecting channels.
If OSD display. These are used for OSD menu item select
4.OK
Come with OSD menu. When choice one item, then press this button to adjust it's value.
5.Menu
Press this button to show or disappear OSD menu.
.INPUT
Press this button to select correct image signal source. Such as TV, Video, PC.....etc.
7.Power
As long as the power cable on the back of the unit is plugged in the socket. This button can
activate or deactivate the power at any time.
8.LAMP / POWER STATUS
LED indicators of Power and Lamp. See page 43 for detail information.


  
   
2  4 5  7