AEG IDE84243IB User Manual page 74

Grease filter
• press on the Display (12) when the letter "G" appears
• press (13) – fixed light
• long press (11) again to confirm activation of the
grease filter indicator
The device can also be used in combination with a
Window sensor KIT (not supplied by the manufacturer).
If the Window sensor KIT is installed (only in the case of use
in EXTRACTOR mode), air extraction will stop working each
time the window in the room, on which the KIT is applied, is
closed.
- The KIT must be electrically connected to the device
by qualified and specialised technical personnel.
- The KIT must be separately certified in accordance
with the safety standards relative to the component
and its use with the device. Installation must be
carried out in accordance with current regulations for
domestic systems.
CAUTION:
- the wiring of the KIT to be connected to the device
must be part of a certified safety extra low voltage
(SELV) circuit.
- the manufacturer of this device declines all liability
for any inconveniences, damage, fires caused by
defects and/or problems associated with malfunction
and/or incorrect installation of the KIT.
74