Table of Contents
Advertisement
Harobot
[Battery replacement]
When the LCD is displayed
battery cover to replace the battery.
Note: do not install the positive and negative poles of the battery. Please dispose of the replaced
battery according to the local regulations.
[Maintenance]
Please keep the sensor and probe cavity clean, otherwise the accuracy of measurement will be
affected. Use a clean soft cloth or cotton stick to dip a small amount of medical alcohol to wipe
the dirt, and use it only after the alcohol completely evaporates.
Before use, please read the operation manual in detail to ensure that the battery has been installed.
It is forbidden to immerse the thermometer in the liquid, and it is forbidden to put it under the
environment of too high or too low temperature for a long time.
It is forbidden to collide, drop or place sharp objects together, or dismantle them by yourself.
The thermometer shall not be used in the sun, water or strong magnetic interference environment.
It is recommended to practice many times to be familiar with the measurement method and try not
to change the factory settings of the product.
Measurement results cannot replace the diagnosis of doctors.
In case of failure during use, please contact the seller or manufacturer.
Please dispose the waste and residue at the end of the service life of the product according to the
local laws and regulations.
[Transportation and storage conditions]
Temperature: - 20 ℃ ~ + 55 ℃
Humidity: ≤ 93% RH
Atmospheric pressure: 86kpa ~ 106kpa
The thermometer is allowed to be used as a general means of transportation. However, severe
impact, vibration, rain and snow splashing shall be prevented during transportation. The packed
thermometer shall be stored in a room with a temperature of - 20 ℃ ~ + 55 ℃, relative humidity
≤ 93% (non condensing), no strong sunlight, no corrosive gas and good ventilation.
, it indicates that the battery is in a low power state. Please push the
Hide quick links:
Advertisement
Table of Contents
