Module Installation; Software Installation - WLtoys V303 Supplemental Information

Appendix 1: WLToys V303 Supplemental Information v18
The capabilities of the module include:

All Calibrations – Compass, Transmitter, Centering Sticks, Gyros

Flight Parameter Edit: Roll/Pitch sensitivity, Sway compensation, Throttle Sensitivity, Altitude and Distance
Limits, Vertical and Horizontal Max speed limits.

Flight Data: GPS data, Lat, Lon, # of satellites, velx, vely, Distance to home, Altitude, Flight Time, Battery Voltage,
Motor Balance, Vibrate and Shake states, Attitude and Flight angles ...

Mapping capabilities using Google Earth allows; Setting Waypoints, and Center Focal point mode

Records a log of flight characteristics and maintains the last 1 minute in a file.

Allows you to fly via your phone/tablet

Creation of Log file.
Pretty exciting .. so let's get started.

Module Installation

The following installation directions apply to the less expensive Module.
It comes with the Communications (Com) cable with a plug at both ends and a power cable with a plug at one end and
bare wires at the other end. Belly connection description is
I had to modify the Com plug by filing down a ridge on the existing plug. It also comes with the antenna.

Software Installation

There are three versions of the Android GCS and they have different capabilities. Here are the three versions:
1. We'll call this the "old version":
2. And the "new version". This is posted on the ZeroUAV site:
(3/18/2014)
They are different. The latest version does NOT contain all the function of the old version. We are currently testing the
differences ... be patient, or if you can, test and report back to me for inclusion.
Function
Parameters can be changed and
saved to the FC and retained
between power cycles.
Data
Map/Paramters Page 1
Fly to Point
Target Lock
Waypoints
Follow Me
Once downloaded and uncompressed you'll need to move the AFK file to the SD card on the phone/tablet. In order to
install it locally I needed to download another Application "AppInstaller by FunTrigger" from the Play Store. Start
AppInstaller, find SD card and install the AFK file.
The GCS App will have the name Zero-GCS.
13
This thread may be helpful in deciphering the log file.
GCS for Android 2013
Old Version
Reported as NO. Some users have
been successful when upgrading to
latest firmware from WLToys.
Similar
Reported as Yes
Reported as Yes
Reported as Yes
Yes
here.
(4/15/2013)
Phone-GCS software-S4V2(support servo gimbal)
New Version
Yes
Similar
Report as Yes
Report as Yes
Report as Yes
No
June-10-2015