Toro 133-0554 Installation Instructions Manual page 7

5
Connecting the Wire Harness
to the Ground-Block Terminal
and Installing the Fuse
Parts needed for this procedure:
1 Fuse (15 A)
1 Fuse decal
Procedure
1. Insert the fuse (15 A) into the fuse block and apply
the fuse decal beneath the fuse block
Figure 11).
Figure 10
MD Model Shown
1. Fuse decal
2. Fuse (15 A)
HD Model Shown
1. Fuse block
2. Fuse decal
(Figure 10
3. Fuse block
Figure 11
3. Fuse (15 A)
2. Connect the wire-harness-terminal ring to the
ground-block terminal
1. Ground-block terminal
or
1. Wire-harness-terminal ring 2. Ground-block terminal
7
(Figure 12 or Figure
Figure 12
MD Model Shown
2. Wire-harness-terminal ring
Figure 13
HD Model Shown
13).