Using Sleep Timer - JVC PC-XC370 Instructions Manual

Using Sleep Timer

With the sleep timer, you can fall asleep to music.
You can set the sleep timer when the unit is turned on using
the remote control.
How the sleep timer actually works
The unit automatically turns off after the specified time
length passes.
1 Press SLEEP on the remote
control.
The SLEEP indicator appears and
the time length until the shut-off
time blinks on the display.
• Each time you press the button, the time length (in
minutes) changes as follows:
2 Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• The sleep timer is also canceled when you turn off the unit.
–20 –