Safety Instructions
2
Safety Instructions
2.1
Information on EMC
If necessary, enlarge distance between source of interference (e.g. motors, frequency inverter) or
drain of interference and device to avoid interference.
2.2
General Safety Instructions
►
Protect product from moisture and humidity.
►
Protect product from too high or too low temperature (see
►
Protect product from fire.
Do not paint the product.
►
►
Do not modify or disassemble the product. Service must be carried out by HMS Industrial
Networks.
►
Store products in dry and dust-free place.
2.3
Intended Use
The devices are used to establish a physical coupling of two or more segments of a CAN bus
system. It is possible to implement tree or star topologies, as well as long drop lines. With a
galvanically isolated repeater network segments can be electrically decoupled.
The devices cannot be used to extend a CAN system because in terms of signal the repeater
corresponds to a line with delay time.
3
Scope of Delivery
Included in scope of delivery:
•
CAN Repeater
•
User Manual CAN Repeater
•
1 x power connector (mounted)
CAN Repeater User Manual
Risk of interference to radio and television if used in office or home environment!
Make sure, that DIN rail is connected to ground.
Use exclusively included accessories. Use exclusively shielded cables.
Make sure, that the shield of CAN cable is connected with the D-Sub 9 and the plug on
the other side.
Technical Data, p.
16).
4.01.0067.20000 3.4 en-US
5 (22)