Crate&Barrel Spotlight Assembly Instructions

SPOTLIGHT
Thank you for purchasing the Spotlight Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
1 - crossbar
Made in Vietnam - r03
DESK
1 - tabletop
assembly
2 - leg frames
(1 left, 1 right)
Customer Service 800.967.6696 | www.crateandbarrel.com
HARDWARE
4 - long
8 - short
bolts
bolts
2 - screw 2 - barrel
posts nuts
Missing hardware? Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
Lay both leg frames face down on a padded surface as
1
shown. Insert 1 screw post into each leg and secure with a
flat head screwdriver. Important: Make sure to align slot on
top of screw post parallel to leg. Do not over tighten screw
posts.
12- split
12 - flat
washers
washers
2 - set screws
flat head screwdriver
IMPORTANT:
Make sure to align
slot of screw post
parallel to leg
Page 1 of 2