Advertisement
photo are held down by the
brackets so that the photo does
not fall off the holder. Insert the
photo holder into the photo slot.
An image of the photo will
appear on the screen.
8. Press "Scan" to scan the
image. You will be prompted to
save or abandon the scanned
image. If you choose to save,
the image will be automatically
saved on your SD memory card.
Part B
Operate the scanner
without a SD card
1. The QPIX PS970H scanner
has an internal memory of up to
128MB.
Connect your scanner to
your computer via the USB cable.
Press "Mode", select "USB"
connection.
The screen will go
On your computer screen, you will
see a new mass storage drive
marked as "NO NAME" which is
the internal memory storage of the
scanner.
Note：
1. Please refer to full User Manual for
detailed operations information and
product specifications.
2. For other enquiries, please send email
to us: enquiry@qpix.com.au
We endeavour to attend to your enquiries
promptly.
2. Press "Mode", the "NO
NAME" drive will disappear
from your computer screen.
Take steps in the above film
scanning or photo scanning
sections to scan film, slides or
photos.
3. You will be prompted to
save or abandon the
scanned image. If you
choose to save, the image
will be automatically saved
into the internal memory of
the scanner.
4. Press "Mode", choose
"USB" connection. On the
computer screen, the
NAME" mass storage will
reappear, click on that to
access scanned image
files.
off.
"NO
Advertisement
