Rinse Aid; Display Brightness; Refill Reminders; Autoopen - Miele G7106 Operating Instructions Manual

Rinse Aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.

Display brightness

You can set the display brightness to
one of 7 different levels.

Refill reminders

If you only ever use combination deter-
gent products or automatic dispensing
using Miele PowerDisks (if available),
you can turn off the refill reminders for
reactivation salt and rinse aid if you
wish.
Please make sure that if you stop us-
ing combination detergents, you refill
the reactivation salt and rinse aid.
Turn the refill reminders back on.

AutoOpen

In some programs the door automati-
cally opens slightly to assist the drying
process.
This function can be deactivated if you
wish.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate coun-
tertops when you open the door at
the end of the program if the fan is
no longer running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Settings
87