Cutlery Tray/Cutlery Basket (Depending On Model); Loading The 3D Multiflex Tray - Miele G7106 Operating Instructions Manual

Loading the dishwasher
Cutlery tray/cutlery basket (de-
pending on model)
 Load the utensils into the 3D Multi-
Flex Tray or into the cutlery basket
(depending on the model).

Loading the 3D MultiFlex Tray

To make unloading easier, utensils
should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Spoon heads should be placed in con-
tact with at least one of the serrated re-
tainers on the base of the cutlery tray to
ensure that water runs off them freely.
 If spoon handles do not fit between
the holders, then lay them the other
way round.
42
You can push the left insert to the mid-
dle in order to accommodate tall items
and long stemmed glasses in the upper
basket (see "Loading the silicone ele-
ments of the FlexCare cup rack" under
"Upper basket").
You can put large and long utensils in
the recessed center part of the tray.
Arrange tall items (such as cake plat-
ters) so that they do not block the
upper spray arm.
You can adjust the height of the right-
hand insert to create more space in the
right-hand part of the tray for larger
utensil items or smaller dishes.
 Pull the insert inward by the yellow
handle and click it into place in one of
the two positions.