Basic Settings; Setting The Language; Setting The Water Hardness - Miele G7106 Operating Instructions Manual

Before using for the first time

Basic settings

Turning on the dishwasher
 Turn the dishwasher on with the
 button.
The welcome screen will appear when
the dishwasher is turned on.
For further information about the dis-
play functionality, see "Display func-
tions" under "Guide to the appliance".

Setting the language

The display will change automatically to
the screen for setting the language.
 Select the language you want as well
as the country, if applicable, using
the  buttons and confirm with OK.
For further information on setting the
language, see "Language" under "Set-
tings".
A check  will appear next to the lan-
guage that has been set.
22

Setting the water hardness

The display changes to the screen for
setting the water hardness.
- The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10-16 gpg (10–15 °dH),
always program the dishwasher to
the higher value (16 gpg (15 °dH) in
this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gpg (°dH)
The dishwasher is programmed at the
factory for a water hardness level 1 gpg
(1 °dH).
 Set the water hardness level in your
area and confirm with OK.
See "Water hardness" under "Set-
tings" for more information.