Golden Compass Sport GP605 CC Owner's Manual page 14

Compass Sport Owner's Manual – Model # GP605 CC, GP605 SS
ASSEMBLY/ DISASSEMBLY
BATTERY INSTALLATION/REMOVAL
Figure 8
Color Coded
Connector
Buckle Strap
1. Use the screws, washers, and nuts provided to connect the positive (red booted)
connector of each cable to the positive (+) terminal of each battery. See figure 8 and
figure 9.
2. Use the screws, washers, and nuts provided to connect the negative (black booted)
connector of each cable to the negative (-) terminal of each battery.
3. Place the batteries into the battery box. Be certain the color coded connectors
match. Refer to the "Battery Connection Diagram" shown in figure 7 on page 14.
4. Secure the batteries in place using the buckle straps. See figure 10.
5. Connect each color coded battery cable connector to the corresponding connector
on the main wire harness. See figure 10.
6. Install both battery box covers.
7. To disassemble, reverse the above process.
Battery
Figure 10
15
Battery shown with
cable connected
properly.
Black (-)
Red (+)
Figure 9
Buckle Strap
Color Coded
Connector
Revised 10/27/14