Listening To A Vinyl Record; Listening To A Cd - it ITVS-760B Instruction Manual

1. Press the "PHONO" function button.
2. Gently open the top cover and simply guide the hinge into place. (Follow diagram below)
*To lock the top cover in the open position, lift up the top
cover all the way so that the hinge is straight (Steps 2-3).
Be sure to push the hinge forward so that it will
lock securely (Step 4). Slowly lower the
top cover so that the hinge
will catch the cover
and remain open.
Note : Be careful not to pinch your finger when opening or closing the top cover.
3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor.
4. Select the appropriate speed.
5. Gently push tone arm clip to the right to release the tone arm.
6. Move the tone arm gently to the edge of the record (or the starting point of a track).
The turntable will begin to turn. Slowly lower the tone arm onto the record.
7. When the record reaches the end, the tone arm will stop and you must lift and return the
tone arm to the tone rest manually. Lock the tone arm rest holder to protect the tone arm.
Important:
- Closing the top cover will help prevent dust from settling on the turntable.
- Always lock the tone arm clip before transporting the unit.
- Do not place anything on top of the turntabl
- Most records will stop spinning after the last track. In some circumstances, the record will continue
to spin, there is NO need for concern, as some records are designed this way.
4. Press the EJECT button
"--- busy CD" will appear for a few seconds and then the number of tracks will show on the display.
5. Press the PLAY/PAUSE button (
6. To temporarily pause playback, press the PLAY/PAUSE button (
7. To skip tracks forward or backward, press the corresponding skip button (
Pressing button to skip to the previous track.
Pressing button to skip to the next track.

Listening to a Vinyl Record

1
SIDE VIEW
e cover, especially while playing a record.

Listening to a CD

1. Press the "CD/USB" button repeatedly to select CD mode.
"--- busy CD" will appear for a few seconds.
Note: When no disc is set, "no cd" will appear on the display.
2. Press the EJECT button
(Note: This button will not work in AM/FM mode)
3. Place a disc on the tray with the printed
label face up.
to close the tray.
) to begin playback from the first track.
9
2 3
SIDE VIEW SIDE VIEW
to open the tray.
). Press again to resume.
4
SIDE VIEW
or ).