BenQ LK990 User Manual page 5

Remote control
Numeric buttons
* This button is not available for this model.
Remote control ID setting
Setting the ID
1. Press and hold ID SET until the ID setting indicator lights up.
2. Enter the ID for the remote control (between 01~99). The remote control ID should be the same as the
corresponding projector ID. (Please set the corresponding projector ID in OSD.)
3. The ID is saved successfully when you see the ID setting indicator starts flickering and then blackout.
Clearing the ID
1. Press and hold ID SET until the ID setting indicator lights up.
2. Press ALL to clear current ID setting of the remote control.
3. The ID is cleared successfully when you see the ID setting indicator starts flickering and then blackout.
On
SOURCE
ASPECT
PICTURE
Up
Volume down
Left
OK
Keystone key
BACK
MENU
MUTE
ALL
No function*
No function*
ID setting indicator
Off
No function*
INFO
LIGHT SOURCE
Keystone key
Right
Volume up
Down
AUTO
BLANK
LIGHT
ID SET
No function*
3D
No function*
No function*
7