Functions And Specifications; Components - LG ACP 5 Installation Manual

ACP 5 FUNCTIONS AND SPECIFICATION
ACP 5 is the central controller that can manage up to 256 equipments in one space individually or
as combined. ACP 5 can monitor or control the equipments installed in each room of the building
from the places such as the management office of a building or the administration office of a
school.
ACP 5 Functions
Major functions of the ACP 5 are as follows.
• Controlling of up to 256 air conditioner indoor units.
• Monitoring of error and operation status
• Controlling the peak power / demand power
• System setting function
• Up to 16 AHU can be interlocked
ACP 5 Components
Inside the packaged box of the ACP 5, there are the components as in the following drawing.
Open the packaged box of the ACP 5, and check if all of the corresponding components are
included.
Power Supply Adaptor
Input: 100-240 V~ 50/60 Hz, 1.2 A
Output: DC 12 V 3.33 A, 40 W MAX
! CAUTION
SD Card provided by LG is for the data backup and recovery when specialized service tech-
nician supports the service, so be careful not to lose it by using it for other purposes.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
!
NOTE
Components or options may differ from the actual product picture.
ACP 5 FUNCTIONS AND SPECIFICATION
PACP5A000
ACP 5
Power Cord
250 V~, 3A
Manual
Screw SD Card 8 GB
7